HP QMS 1660E manual 70

Interfaces

Notes	Use the Administration/Communications/Serial/Parity menu to
	set parity.

Minimum Number of Kilobytes for Spooling

Sets the minimum number of kilobytes of system memory allocated to the serial interface.

Menu	Administration/Communications/Serial/Min K Spool
Choices	00000-99999
Default	00015
Notes	This value must be less than K Mem For Spool.
	A 00000 value does not turn off the spooling buffer for the
	serial interface. If the value is set to 00000, the printer
	calculates the Min K Spool automatically at initialization.
	The printer must be restarted for changes to the Min K Spool
	menu to take effect. You can either let the printer restart
	automatically after you save the change and exit from the
	configuration menu, or you can wait for the change to take
	effect the next time you manually turn on the printer.

Mode

Enables or disables the PostScript interactive mode from the host.

Menu	Administration/Communications/Serial/Mode
Choices	Interactive—Establish two-way communication between the
	host and the printer.
	Noninteractive—Establish one-way communication from the
	host to the printer.
	Disabled—Turn off ser ial communication with the host. The
	printer stops accepting print jobs over the serial interface.
Default	Interactive
Notes	The printer must be restarted for changes to the Mode menu to
	take effect. You can either let the printer restart automatically
	after you save the change and exit from the configuration
	menu, or you can wait for the change to take effect the next
	time you manually turn on the printer.

4-38 QMS 1660E Print System Reference