Hard Disks

Installing an Optional Font

Use the Administration/Disk Operations/Install Option menu to add optional fonts to the hard disk from a font card. This selection copies data from the card to the hard disk. See chapter 6, “Printer Options,” for instructions.

»Note: If an error message displays in the message window during this operation, press the Menu key to remove the message and restart the operation from the beginning.

▲Caution: Before you install any optional fonts, ensure that the printer has enough memory, or they may not all be available for use. If it doesn’t, you can install SIMMs (see chapter 6, “Printer Options”) to increase printer memory, or you can install a hard disk (see chapter 6, “Printer Options”) and enable disk swapping (Administration/Memory/ Enable Disk Swap menu–see the “Memory” section, later in this chapter).

Removing an Optional Font

Use the Administration/Disk Operations/Remove Option menu to remove a previously installed optional font. See chapter 6, “Printer Options,” for instructions.

»Note: If an error message displays in the message window during this operation, press the Menu key to remove the message and restart the operation from the beginning.

4-30

QMS 1660E Print System Reference