Font and

Security Cards

The card slots are located on the right side of the printer below the output tray. The printer supports up to two cards at once. You may insert any type of card in either slot.

▲Caution: Your printer supports only QMS PCMCIA cards. These cards are not backward compatible with previously released QMS printers, and cards for previous printers are not compatible with your printer.

In addition, some cards may require that you add more memory to your printer.

For a complete list of available font cards, contact your QMS vendor.

▲Caution: The printer must be off line (the Online/Offline indicator is off) before you insert or remove cards. Press the Online/Offline key once to take the printer off line. If you insert a font card in one of the card slots without taking the printer off line, the card will not be recognized.

Using a Font Card

Use the following procedure to use a font card on your printer. If your printer has a hard disk, you can install the font information from the card onto your hard disk. See “Installing an Optional Font” later in this chapter for instructions.

1If you are using an HP ProCollection font card, turn off the printer.

Otherwise, press the Online/Offline key to take the printer off line. (The Online/Offline indicator should be off.)

6-16

QMS 1660E Print System Reference