HP QMS 1660E Default Job Priority, Minimum Number of Kilobytes for Spooling

	Optional
	Interfaces
Notes	The printer must be restarted for changes to the Connection
	menu to take effect. You can either let the printer restart
	automatically after you save the change and exit from the
	configuration menu, or you can wait for the change to take
	effect the next time you manually turn on the printer.

Default Job Priority

Allows you to specify which jobs are printed first, according to the interface through which they are received, when jobs are received simultaneously. In other words, you can give jobs received via the LocalTalk interface priority over jobs received via the parallel and serial interfaces.

Menu Administration/Communications/LocalTalk/Def Job Prio

Choices 001-100 (highest-lowest priority)

Default 001 (highest priority)

Minimum Number of Kilobytes for Spooling

Sets the minimum number of kilobytes of system memory allocated to the LocalTalk interface.

Menu	Administration/Communications/LocalTalk/Min K Spool
Choices	00000-99999
Default	00015
Notes	This value must be less than the K Mem for Spool value.
	A 00000 value does not turn off the spooling buffer for the
	parallel interface. If the value is set to 00000, the printer
	calculates the Min K Spool automatically at initialization.
	The printer must be restarted for changes to the Min K Spool
	menu to take effect. You can either let the printer restart
	automatically after you save the change and exit from the
	configuration menu, or you can wait for the change to take
	effect the next time you manually turn on the printer.

Printer Options 6-53