HP QMS 1660E manual 126

End Job Mode

Next	Advances to the appropriate option (QMS	END JOB MODE
	EOD, HP EOD, or None).	OPTION
Select	Selects the option.	OPTION
		IS SELECTED
	Returns to the Parallel (or Serial)/End Job	PARALLEL/SERIAL
	Mode menu.	END JOB MODE
Online/	Asks you if you want to save your	SAVE CHANGES?
Offline	change.	NO
Next	Advances to the Yes option.	SAVE CHANGES?
		YES
Select	Saves your change and idles the printer.	IDLE
Online/	Puts the printer back on line.	IDLE
Offline

Adding an EOD Command to Your File

When adding an EOD command to your file, use the syntax for the selected EOD command exactly as written (the command's syntax is case sensitive).

»Note: <ESC> represents the escape character. (The decimal value for the escape character is 027, and the hexadecimal value is 1B.) How you enter the escape character depends on your application.

Some applications allow you to press and hold the ALT key and then type 027 to enter the escape character, while others allow you to type certain character sequences to represent the escape character. See your computer or application documentation to find out how to enter the escape character on your system.

For this EOD command...	Use this syntax...
QMS EOD	%%EndOfDocument
	<CR><LF>
HP EOD	<ESC>%-12345X

»Note: The <CR><LF> sequence following the %%EndOfDocument line for the QMS EOD is necessary to avoid an INPUT IDLE message remaining in the printer message window after the document finishes printing.

5-28 QMS 1660E Print System Reference