HP QMS 1660E manual 80

Memory

page. Increasing this client's size increases the number of PCL downloaded fonts which can be accepted.

Menu	Administration/Memory/K Mem Emul Tmp
Choices	00256-08192
Default	00256
Notes	This value must be greater than the sum of the Min K Spool for
	all installed and enabled interfaces.
	If you change the K Mem Emul Tmp value, the printer
	automatically restarts after you save your changes and exit
	from the configuration menu.

Enable Disk Swap

The Enable Disk Swap memory client gives your printer virtual memory capability for all memory clients through the creation of a “swap file” on the printer’s hard disk. The default size of the swap file depends on the amount of RAM installed. The more RAM installed, the larger the default swap file size will be. The printer uses this file as an extension of its memory. As the physical RAM fills, the printer can swap the contents to the hard disk file to allow more space. This file swapping between disk and RAM occurs at various times throughout the printing process and is completely transparent.

»Note: The printer must have a hard disk to take advantage of this feature.

Menu	Administration/Memory/Enable Disk Swap
Choices	No—Don’t enable disk swapping.
	Yes—Enable disk swapping.
Default	No

4-48 QMS 1660E Print System Reference