HP QMS 1660E manual 92

Printer Start-Up

Options

Choices	Yes—Print a start-up page each time the printer is turned on.
	No—Don’t print a start-up page each time the printer is turned
	on.
Default	Yes
Notes	If you used the Administration/Engine/Inputbin x Name options
	to change the names of the inputbins, these names replace
	Multipurpose, Lower, and Optional in the message window.

Enabling/Disabling the SYS\START File

If you have a hard disk and Do Sys Start is enabled, when the printer is turned on, the controller checks the hard disk for a PostScript file named SYS\START and executes this file. This file does not print.

Menu	Administration/Startup Options/Do Sys Start
Choices	Yes—Check the hard disk for and execute the SYS\START file
	when the printer is turned on.
	No—Don’t check the hard disk for a SYS\START file.
Default	Yes

Loading the PostScript Error Handler

You have the option of loading Error Handler, a diagnostic tool that allows you to identify PostScript errors encountered during a print job. Refer to the PostScript Language Reference Manual (Adobe Systems Incorporated, Reading, PA: Addison-Wesley, 1990, ISBN 0- 201-18127-4) for more information on PostScript errors.

Menu	Administration/Startup Options/Do Error Handler
Choices	Yes—Load the Error Handler.
	No—Don’t load the Error Handler.
Default	No
Notes	You must turn the printer off and on again for this option to take
	effect.

4-60 QMS 1660E Print System Reference