HP QMS 1660E manual 98

Timeouts

Setting a PostScript Emulation Timeout

The PostScript emulation timeout is the maximum number of seconds the PostScript emulation waits for incoming data.

Menu	Administration/Communications/Timeouts/PS Wait Timeout
Choices	00000-99999
Default	00030 (30 sec.)
	However, when a print job is sent from a Macintosh, the PS
	Wait timeout is automatically changed to 00300 (5 min.).
Notes	A value of 000 is the same as infinity (no timeout.)
	The job is closed and the next job in the queue begins if all of
	the following occur:
	n No additional data is received during the
	specified period of time.
	n The interface didn’t time out.
	n An EOD (end-of-document commands) was
	not seen.
	Large print jobs, such as those generated by graphics or
	computer-aided design applications, require that this number
	be increased to 00300 (5 min.).

Setting a Print Job Timeout

The print job timeout is the maximum number of seconds the printer processes a print job before it ends the job.

Menu	Administration/Communications/Timeouts/Job Timeout
Choices	00000-99999
Default	00000 (infinity, no timeout)
Notes	A value of 000 is the same as infinity (no timeout).

L

4-66 QMS 1660E Print System Reference