Interfaces

Default Job Priority

Allows you to specify which jobs are printed first, according to the interface through which they are received, when jobs are received simultaneously. In other words, you can give jobs received via the parallel interface priority over jobs received via other interfaces.

Menu

Administration/Communications/Parallel/Def Job Prio

Choices 001-100 (highest-lowest priority)

Default 001 (highest priority)

Emulation

Sets the parallel interface emulation.

Menu Administration/Communications/Parallel/Emulation

Choices ESP, Hexdump, HPGL, Lineprinter, PCL5, PostScript

Other optional emulations also appear, if installed.

Default ESP

End Job Mode

Enables (and identifies an end-of-job sequence) or disables data stream sensing for the end-of-document (EOD) command. These sequences allow hosts to enforce print job sequencing without considerations for interacting timeouts. See chapter 5, “Additional Technical Information,” for details on how to implement this feature on your QMS 1660E Print System.

Menu

Administration/Communications/Parallel/End Job Mode

Choices None—The printer re cognizes only the PostScript ^D command.

QMS EOD—The printer recognizes only the QMS %%EndOfDocument command.

HP EOD—The printer rec ognizes only the HP <ESC>%- 12345X command.

Default None

4-32

QMS 1660E Print System Reference