Optional

Interfaces

cSnap the daughterboard onto the two support posts and the 80-pin connector.

4Replace the controller board and printer covers.

Use the instructions in the “Replacing the Printer and Controller Board Covers” section of this chapter.

5Reconnect all interface cables and the power cord, and then turn on the printer.

6Download the new print system software.

Use the instructions in “Updating System Software,” later in this chapter.

Both the start-up page and the status page indicate that the 1200x1200 dpi daughterboard is installed.

Optional Interfaces

In addition to the three standard interfaces—parallel, serial, and Ethernet—the QMS 1660E Print System has the option of using a

Printer Options

6-37