HP QMS 1660E Notes, Range, Notes, Range, Range, Syntax, Format, Format, Purpose, Purpose, Default, Purpose, resource, Variables, resource id, object code

		Updated DOC
		Commands
Resource Command
Syntax	%%IncludeFeature:resource(resource id object code)
Purpose	Establishes the current resource and the default object code
	value for the current job to which it is attached.
Notes	This command is identical to the %%IncludeFeature:install
	DOC command. It is included for backward compatibility.
	All downloaded objects are by default temporary, and will be
	deleted at the end of a job unless Retain Temporary is set to on,
	true, or on compatibility. If the file that the %%IncludeFeature:
	resource command is attached to does not make the
	downloaded font permanent and Retain Temporary is not set,
	then those objects are removed from the disk when the job
	completes.
	A downloaded font can only be accessed by its ID if the font is
	stored in the current resource. Regardless of its resource, a font
	can be selected by its attributes.
Variables	resource id
	Purpose	Identifies one of the possible locations for
		downloaded objects.
	Range	0-6
	Default	Internal system disk
		(usually DSK6:/BIN/EMULATE/PCL/FONTS
	Format	Integer
	Notes	If no resource item is provided, the internal default
		location is used; otherwise, this parameter, which
		must be provided, specifies one of the alternate
		locations. For most QMS printers, resource 6 is the
		system disk.
	object code
	Purpose	Assigns a code to an object such as a font, macro, or
		pattern.
	Range	0-32767
	Range	0
	Format	Integer

Document Option Commands C-13