Intellifont SIMM

5If necessary, refer to “Installing a SIMM,” earlier in this section.

6Replace the printer and controller board covers.

Use the instructions in the “Replacing the Printer and Controller Board Covers” section of this chapter.

Intellifont SIMM

An optional Intellifont SIMM increases the number of fonts available to the HP PCL 5 emulation on your printer from 20 to the 37 PCL 5 fonts available on a Hewlett-Packard LaserJet 4Si.

Installing the Intellifont SIMM

MWARNING! Turn off the printer and unplug the power cord before taking the cover off the printer.

ACHTUNG! Bitte schalten Sie den Drucker aus und ziehen Sie den Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.

Caution: It's very important to protect the printer controller board and SIMMs from electrostatic damage while performing this task. Review the anti-static guidelines in the “Removing the Printer and Controller Board Covers” section, earlier in this chapter. Handle SIMMs carefully, preferably only by the edges.

1Access the printer controller board.

Use the instructions in the “Removing Printer and Controller Board Covers” section of this chapter.

2Position the controller board so the interface panel is on your right.

3Remove the SIMM from the anti-static bag.

6-30

QMS 1660E Print System Reference