End Job Mode

your print queuing system documentation, your network administra- tor, or your QMS vendor for more information.

Setting the End Job Mode via the Control Panel

Use the following procedure to set the end job mode from the printer’s control panel for printers connected via the serial or parallel interface to a stand-alone PC, a PC print server, or some other type of print queuing system.

»Note: If you print both serial and parallel protocol jobs, then you must set the end job mode for each protocol.

Wait for the printer to go idle, and then press the control panel keys in the order shown in the following instructions to access the End Job Mode option. The printer responds by displaying a status message in the message window.

»Note: You may need to press the Next key one or more times to advance through the list of selections or options.

Key

Purpose

Message Window

 

 

 

Online/

Turns off the Online/Offline indicator and

IDLE

Offline

readies the printer for configuration.

 

 

 

 

Menu

Accesses the configuration menu.

CONFIGURATION

 

 

OPERATOR CONTROL

 

 

 

Next

Advances to the Operator Control/

CONFIGURATION

 

Administration menu.

ADMINISTRATION

 

 

 

Select

Accesses the Administration menu

ADMINISTRATION

 

 

COMMUNICATIONS

 

 

 

Next

Advances to the Communications/Parallel

COMMUNICATIONS

 

(or Serial) menu.

PARALLEL (or

 

 

SERIAL)

 

 

 

Select

Accesses the Parallel (or Serial) menu.

PARALLEL/SERIAL

 

 

MODE

 

 

 

Next

Advances to the Parallel (or Serial)/End

PARALLEL/SERIAL

 

Job Mode menu.

END JOB MODE

 

 

 

Select

Accesses the End Job Mode menu.

END JOB MODE

 

 

OPTION

 

 

 

 

 

 

Additional Technical Information

5-27