Updated DOC

Commands

Updated PCL 5 DOC Commands

Disable Scalable Fonts Command

Syntax %%IncludeFeature:scalablefonts(value)

Purpose Enables/disables PCL 5 scalable fonts

Variable value

Purpose Specifies whether to disable scalable fonts.

Range 0—Enables scalable fonts

1—Disables scalable fonts

Default 0

Notes Disable scalable fonts to

nPrint PCL 4 documents which inadvertently select PCL 5 scalable fonts.

nMore closely emulate the PCL 4 font environment.

Install Object Command

Syntax

%%IncludeFeature:install(resource id object id)

Purpose Establishes the current resource and the default object ID value for the current job to which it is attached. If it is attached to a job that downloads a font without setting the current object ID using the PCL escape sequence <ESC>(#X, it has the appearance of “storing” the font on disk.

Variables resource id

Purpose Identifies one of the possible locations for downloaded objects

Range

0 to 6

Default Internal system disk

Format Integer

Notes If no %%IncludeFeature:install DOC command is sent, the internal default location is used; otherwise, this parameter, which must be provided, specifies one of the alternate locations. For most QMS printers, resource 6 is the system disk.

C-8

QMS 1660E Print System Reference