HP QMS 1660E Notes, Notes, Range, Syntax, Format, Purpose, Purpose, Default, Variable, linesperpage, Format boolean, %%IncludeFeature:linesperinch (#)

Updated DOC

Commands

Format boolean

Notes The result of various settings for these parameters is shown in the table included in the Set Carriage Return (Line Termination) discussion, in terms of the equivalent code passed to the PCL line termination command. The second setting (lfiscrlf on, criscrlf off) is correct for most ASCII listings printed from UNIX machines. PC listings should usually be done with both items set to Off, and Macintosh listings usually require the third setting (lfiscrlf Off, criscrlf On). Note that the FF becomes a CR-FF when the LF is a CR- LF.

Set Lines Per Inch Command

Syntax	%%IncludeFeature:linesperinch (#)
Purpose	Sets the default PCL line spacing.
Notes	Both the %%IncludeFeature:linesperinch and
	%%IncludeFeature:linesperpage DOC commands affect
	PCL’s default VMI (vertical motion index). In the event that both
	are specified, the linesperpage DOC command is ignored.
Variable	#
	Purpose	Specifies the default number of lines per inch.
	Range	1-48
	Default	6
	Format	Integer

C-18 QMS 1660E Print System Reference