HP QMS 1660E manual 40

Configuration

Menu

at a time. The current input character flashes. Use the following keys to change the current input character:

Press this key... to...

Next	Advance to the next choice for the current input character.
Previous	Return to the previous choice for the current input
	character.

Once you have changed the current input character, use the following keys to move the cursor to another input character:

Press this key... to...

Select	Advance the cursor to the next character.
Menu	Return the cursor to the previous character.

To exit from the character selection process, move the cursor to the last character of the input field (the character farthest to the right) and press the Select key, or move to the first character of the input field (the character farthest to the left) and press the Menu key.

When you exit, the printer verifies the character information and confirms it in the message window. If the character information is valid, you are returned to the previous menu; if it is invalid, you are returned to the input field. Press the Menu key to cancel any changes to the character information.

If the current character information is longer than the value that you need to enter, replace each extra character with a space. The printer interprets a space at the end of character information as a blank.

Example

To change the HP-GL emulation scaling percent, press the control panel keys in the order shown in the following table. The printer responds by displaying a status message or configuration menu in the message window. An underline indicates the current input character in the message window.

4-8 QMS 1660E Print System Reference