Single In-Line

Memory

Modules

4Insert the SIMM into the SIMM connector.

Hold the SIMM at a 45° angle to the controller board, with the notch on the right side. Slide the SIMM into either SIMM connec- tor, and then push gently on it to make sure it is securely seated in the connector.

»Note: You can insert a SIMM in either SIMM connector as long as DRAMØ, the SIMM connector closest to you, is occupied. “DRAMØ” is marked on the controller board for ease of identification.

45°

Notch

Printer Options

6-27