•Subnet Mask—The subnet mask of the iLO IP network. If DHCP is used, the subnet mask is supplied automatically. If DHCP is not used, enter a subnet mask for the network.
•Gateway IPv4 Address—The iLO gateway IP address. If DHCP is used, the iLO gateway IP address is supplied automatically. If DHCP is not used, enter the iLO gateway IP address.
•Static Route #1, Static Route #2, and Static Route #3—The iLO static route destination, mask, and gateway addresses. If Use DHCPv4 Supplied Static Routes is used, these values are supplied automatically. If not, enter the static route values.
•Primary DNS Server—Enter the IPv4 address for the primary DNS service.
•Secondary DNS Server—Enter the IPv4 address for the secondary DNS service.
•Tertiary DNS Server—Enter the IPv4 address for the tertiary DNS service.
NOTE: When DNS server locations are configured in both IPv4 and IPv6, both sources are used, with preference given according to the iLO Client Applications use IPv6 first configuration option, primary sources, then secondary, and then tertiary.
•Enable DDNS Server Registration—Specify whether iLO registers its IPv4 address and name with a DNS server.
•Primary WINS Server—Enter the IPv4 address for the primary WINS server.
•Secondary WINS Server—Enter the IPv4 address for the secondary WINS server.
•Enable WINS Server Registration—Select this check box to enable iLO to register the IPv4 address for the WINS server(s).
•Ping Gateway on Startup—Select this check box to have iLO send request packets to the gateway when iLO initializes.
To edit the settings on the IPv4 tab:
1.In the iLO Configuration Utility window, click Network Settings. The General tab data appears.
2.Click the IPv4 tab. The IPv4 tab data appears.
3.If you have enabled DHCPv4, uncheck the check box.
