NOTE If your data plan does not include Palm mobile hotspot, you cannot access the Internet from devices that use your webOS smartphone as a
7(Optional) To customize the name of your hotspot, tap the name in Network Info, enter a new name, and tap Done.
8After you create the hotspot, go to the device you want to connect to the Internet (for example, your laptop) and use its
Use Palm mobile hotspot
BEFORE YOU BEGIN
•Create a secure (see Create a secure hotspot) or open (see Create an open hotspot) hotspot.
•Make sure you are connected to the AT&T network.
1Open Palm mobile hotspot .
2Tap Off to switch Palm mobile hotspot from Off to On.
The icon appears at the bottom of the screen when the mobile hotspot is turned on.
If you are connected to a
3Connect other devices to the hotspot (such as a laptop). Any devices enabled with
4When you finish using your smartphone as a mobile hotspot, turn off Palm mobile hotspot to save battery power.
TIP You can extend your battery time by charging your battery (see Charge the battery) while you are using Palm mobile hotspot.
Change your secure passphrase
1Open Palm mobile hotspot .
2Tap Change Passphrase.
3Enter the new passphrase and tap Done.
View information about connected devices
1Open Palm mobile hotspot .
2In Connected Devices, tap a device. The following information is displayed: Name: The name of the connected device
Type: The type of connection between the device and your smartphone
Mac Address: A unique address associated with the device
Assigned IP: The IP address of the connected device
160 Chapter 10 : Web and wireless connections