Set up your smartphone

Insert the SIM card and set up your smartphone

Your SIM (Subscriber Identity Module) card contains information on your wireless account. To make calls or use your smartphone’s email or web features, you need to insert a SIM card.

If you don’t have a SIM card, contact AT&T.

To take advantage of the high-speed data connection available on your smartphone, you may need to have a 4G or 3G SIM card. Check with AT&T for information.

1Use your fingernail to open the SIM card slot cover.

2Insert the SIM card. Note the position of the notch.

*Notch

3Close the SIM card slot cover.

4Press and hold the power button on the upper-right corner of your smartphone until you see a logo on the screen (approximately five seconds). Your smartphone needs a few seconds to start up.

TIP If your smartphone does not turn on after you press and hold power, you need to connect your smartphone to the AC charger to charge it.

5Follow the onscreen instructions to complete setup.

6To create a Palm profile, enter a working email address, create a password for your profile, and select and answer a security question.

IMPORTANT Be sure to write down the email address and password that you use to create your profile; you will need them later.

18 Chapter 2 : Basics