C H A P T E R 5 Using Local Management

Configure VLAN ID for Untagged Traffic

Local Management

LOCATION

Main Menu

Configure VLAN

Configure Port VLAN ID...

Description

Use this screen to set up the switch to manage incoming packets that do not contain IEEE 802.1Q VLAN tags or priority-tagged traffic (packets with a VID of zero). This applies to ingress traffic only; it does not apply to outbound traffic.

Untagged traffic is ordinarily assigned to VLAN 1 (the DEFAULT_VLAN), which includes all ports on the switch. However, if you don’t want to send untagged traffic on a port to the default VLAN, you can assign a different PVID.

For example, if you set a port’s PVID to 5, all untagged traffic on the port is assigned to VID 5—even if the port does not belong to that VLAN.

PVID: Type the VID of the existing 802.1Q VLAN where you want to send untagged traffic.

APPLY: Applies the changes on this page.

103

Page 109
Image 109
Intel 460T manual Configure Vlan ID for Untagged Traffic