A P P E N D I X | A Technical Information |
List of Factory Defaults
•Software upgrade mode: Network
•TFTP Server Address: 0.0.0.0
•Load configuration file: Disabled
•Console baud rate: 9600
•Console port data bits : 8
•Console port stop bit: 1
•IGMP Snooping: Disabled
•System port partition state: Enabled
•Lock Address Table: Disabled
•MAC Address Aging (sec): 300
•System
•System console timeout : 15 minute
•System IGMP timeout: 300 sec
•System IP address: 192.0.2.1
•System Subnet mask: 255.255.255.0
•System Default gateway: 0.0.0.0
•System BootP request: Enabled
•Port Nway state: Enabled
•Port flow control state:
•Port back pressure state:
•Port priority state: Use Frame Tag
•Port HOL state: Enabled
•Ping IP address: 0.0.0.0
•Ping repeat time: 1 time
•Ping time out: 5 sec
•Port Mirroring state: Disabled
•Port Mirroring source port: 1
•Port Mirroring destination port: 2
•System Spanning Tree state:
•System Bridge Max age: 20 sec
•System Bridge Hello time: 2 sec
•System Bridge Forward delay: 15 sec
•System Bridge Priority: 32768
•System aging time: 300 sec
•Per Port spanning tree path cost: 10
•Per Port spanning tree priority: 128
•Per Port state: Enabled
•Per Port spanning tree state: Enabled
•Read community string: public
•Write community string: private
•Console user account: No username
•Console user password: No password
Optional module default settings
•FX Module Port Speed: 100 Mbps
•FX Module Port Duplex: Full duplex
•FX Module Flow Control: IEEE 802.3x
•FX Module Priority: Use Frame Tag
•SX\LX Module Port Speed: 1000 Mbps
•SX\LX Module Port Duplex:
•SX Module Flow Control: IEEE 802.3x
•SX Module Priority: Use Frame Tag
Appendix A
125
