C H A P T E R 5 Using Local Management

Add an IEEE 802.1Q VLAN (Configure

Port Membership)

Local Management

LOCATION

Main Menu

Configure VLAN

Create an 802.1Q VLAN

NOTE

A ‘+’ next to the Member toggle indicates that port is a member of more than one VLAN.

Description

VLAN Name: Assign a name to the VLAN. The name can consist of any character (no spaces) and be up to 12 characters long. Once a VLAN is created the name cannot be changed.

VLAN ID: Assign a unique ID number to the VLAN. This number is used to identify all packets belonging to that VLAN. Type a number from 2 to 4094. The DEFAULT_VLAN (created when you select a VLAN operation mode) is assigned a VID of 1.

Allow IGMP Snooping: Press the zto determine if the switch will perform IGMP snooping on this VLAN. Up to12 IGMP snooping sessions are allowed.

Member: Identifies which ports will participate in the VLAN. Press the zto toggle the field for the following options:

<Yes> The port is a member of the VLAN

<No > The port is not a member of the VLAN.

The port is part of an aggregated link.

NEXT: Accesses the Add an 802.1Q VLAN (Configure Port Tagging) screen.

95

Page 101
Image 101
Intel 460T manual Add an Ieee 802.1Q Vlan Configure Port Membership