C H A P T E R 5

Intel Express 460T Standalone Switch Users Guide

Configure Static MAC Addresses

LOCATION

Main Menu

Configure Device

Forwarding and Filtering

Static MAC Addresses

NOTE

If tag-based or port-based VLANs are currently running, you must assign each static MAC address to a specific VLAN.

Description

Static MAC addresses remain in the switch’s address table, whether or not the device is physically connected to the switch. After you define a static MAC address, it remains in the switch’s address table until you remove it.

Enter MAC: Type the MAC address you want to add to the address table.

VLAN or VLAN ID: When VLANs are active on the switch you can define static MAC addresses for each VLAN. If port-based VLANs are active press the zto select a VLAN. If tag-based VLANs are active type the VLAN ID that the static MAC address will be assigned to.

Select Port: Use the zto select a port on the switch where the switch forwards traffic.

ADD/DELETE: Adds or removes a MAC address from the switch’s table.

68

Page 74
Image 74
Intel 460T manual Configure Static MAC Addresses