C H A P T E R 5

Intel Express 460T Standalone Switch Users Guide

NOTE

To access the switch using Telnet, your workstation must be in the same subnet as the switch.

Using Telnet

1Open a Telnet application. In Windows 98 or Windows NT*, select Run from the Start Menu and then type: telnet E.

2On the Terminal menu, select Preferences. Make sure the emulation type is VT-100/ANSI and that VT100 arrows are enabled.

3On the Connect menu, select Remote System. Enter the IP address of the switch and click Connect. (The default IP address is 192.0.2.1.)

4Log on to Local Management. By default, no password or username is assigned.

Logon Screen

Description

By default, no username or password is assigned to the switch. Press Etwice to log on to the Local Manager. Usernames and passwords can consist of any characters and can be up to fifteen characters in length. Remember that usernames and passwords are case-sensitive.

54

Page 60
Image 60
Intel 460T manual Logon Screen, Using Telnet, Description