
C H A P T E R 5 | Intel Express 460T Standalone Switch Users Guide |
Module Port Settings
LOCATION
Main Menu
Configure Device
Module Port Settings
Description
Ports: Press the zto select a port on the module (FX Module only).
State: Press the zto toggle the field and disable or enable ports.
Speed/Duplex: Press the zto toggle the field options and change the speed and duplex of the port. You can set the port to
Flow Ctrl (Control): Press the zto enable or disable flow control.
Priority: Press the zto change the settings. The <Frame> setting reads the packet’s 802.1 priority tag and handles it accordingly. The <Low> and <High > settings force the packet into one of two priority queues. Forcing a packet into a queue does not retag the packet.
Link: Indicates the port’s current link status:
10M/100M: Indicates the port’s speed, either 10 Mbps or 100 Mbps.
Full/Half: Indicates a device is connected at
IEEE/BackP: Indicates the type of flow control, either IEEE PAUSE frames or backpressure.
Partitioned: Indicates port was disabled due to a partition error.
Source mirror/Target mirror: Indicates the port being mirrored and where the data is being sent.
60