JVC AV42PD20ES manual Watch images from external devices, „ Use the PR List

Remote control buttons and functions

„Use the PR LIST:

1 Press the h(Information) button to display the

PR LIST
Pressing the h(information) button changes the display
as follows:		12:00
PRPRAVLIST	ID
1	BBC1
2
3
4
5
6
7
8	OK+10	No indication
-10TV09
D0011-EN

2Press the 5 and 6 buttons to choose a programme number (PR). Then press the a button

•For programme numbers (PR) with the CHILD LOCK function set, the n (CHILD LOCK) mark is displayed next to the programme number (PR) in the

PR LIST.

•You cannot use the 6 buttons to choose a programme number (PR) with the CHILD LOCK function set.

•Even if you try to choose a programme number (PR) with the CHILD LOCK function set, the n (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 21.

•To prevent screen burn-in, the PR LIST menu automatically disappears from the screen if no TV operation has been performed for about one minute. Also, the programme number automatically dim.

Adjust the volume

Press the 5 buttons to adjust the volume.

The Volume indicator appears and the volume changes as you press the q buttons.

To listen to the sound using headphones:

See “HEADPHONE” on page 18.

„Muting the sound

Press the l(muting) button to turn off the sound.

Pressing the l(muting) button again restores the previous volume level.

Watch images from external devices

„Use the 6 buttons:

Press the 6 buttons to choose an EXT terminal.

„Use the PR LIST:

1Press the h(Information) button to display the

PR LIST

2Press the 5 and 6 buttons to choose an EXT terminal. Then press the abutton

•The EXT terminals are registered after the programme number PR 99.

•You can choose a video input signal from the S- VIDEO signal (Y/C signal) and regular video signal (composite signal). For details, see “S-IN (S-VIDEO input)” on page 19.

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 17.

•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

•This TV set has a function which can automatically change over the input according to a special signal output from an external device. (The EXT-4 terminal does not support it.)

•The PR LIST cannot be used to choose the input from a PC. Use another method when choosing the input from a PC.

To return to a TV channel:

Press the bbutton, the 6 buttons or the Number buttons.

To use the programme number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 23.

Pressing the obutton changes the choice as follows:

TV modePR0	EXTEXT--14modesEXTEXT--23
Programme
numbers
PR 1 – PR 99		or
	or	or

•The VCR RF channel is sent as the RF signal from the VCR.

•Also refer to your VCR instruction manual.

ENGLISH

„Use the obutton:

Press the obutton to choose an EXT terminal.

TV mode

Programme

numbers PR 1 – PR 99

EXTEXTEXT--14modesEXTEXT--23

	or
or	or

9