JVC AV42PD20ES manual „ Language, „ Auto Program, Choose Auto PROGRAM. Then press the a button

Using the TV’s menu

INSTALLD0029TV-LAAUTOEDITENISTALLNG/MANUALUAGEPROGRAMBACKOK

„LANGUAGE

You can choose the language you want to use for the on- screen display from the language list in a menu.

1ChooseLANGUAGE LANGUAGE, then press the abutton

A sub-menu of the LANGUAGE function appears.

D0002TV(E)-ENBACKOK

2Press the 5 and 6 buttons to choose a language.

Then press the abutton

„AUTO PROGRAM

You can automatically register the TV channels which can be received well at your home in the TV’s programme numbers (PR) by performing the following.

1Choose AUTO PROGRAM. Then press the a button

The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY menu as follows:

D0003TV	BACK	START	TV	BACK	START
	-ENOK	MORE		OK	MORE

2Press the 5 and 6 buttons to choose the country where you are

3Press the blue button to start the AUTO PROGRAM function

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the programme numbers (PR).

•	To cancel the AUTO PROGRAM function, press the
	bbutton.		EDITPR	ID		/CC
AUTOPROGRAM
		CH10	AV	BBC1		1
	20%		1
			2			2
			3			3
			4		H	4
	BACK		5			25
TV			6			6
		OK	7			1
			8	BAOKCKMOVE	CC	2	DELETEINSERT
D0004-EN			TV09			03
							MANUAL

After the TV channels have been registered in the programme numbers (PR), the EDIT menu appears.

•You can edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/ MANUAL” on page 23.

•If you do not need to use the EDIT/MANUAL function, go to the next step.

If “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels in a short time. For details of the ACI function and how to use it, refer to “Using the ACI function” on page 28.

If you don’t want to use the ACI function, press the 6 buttons to choose ACI SKIP and then press a.

4PressT-VLINKthe abutton to display the T-V LINK

menuD000DOWTV5-ENNLOBADACKOKEXITTV VCR

5If you do not have a T-V LINK compatible VCR connected:

Press the bbutton to exit the T-V LINK menu.

If you have a T-V LINK compatible VCR connected to the EXT-2 terminal:

Follow the operating procedure “Downloading the data to VCR” on page 28 to transmit the Programme number (PR) data.

•When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered.

When the COUNTRY setting is UNITED KINGDOM:

•BBC1, BBC2, ITV, Channel 4 and Channel 5 are automatically set to the programme numbers PR1 to PR5. If the TV doesn’t receive one of these TV channels, that programme number (PR) will not be set. Programme number PR6 is not normally set.

•In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see “EDIT/MANUAL” on page 23).

•If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function. For details, see “EDIT/ MANUAL” on page 23.

•No TV channel is registered in programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV) manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 23.

22