Additional preparation

„Devices which can output the S-VIDEO signal (Y/C signal) such as a S-VHS VCR

Connect the device to an EXT terminal other than the EXT- 1 terminal.

You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (S-VIDEO input)” on page 19.

„T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the Decoder to the VCR. If not, the T-V LINK function may not work properly. After you have registered TV channels to the programme numbers (PR), set the DECODER (EXT-2) function for the programme number (PR) to ON in order to unscramble a scrambled TV channel. For details of operation, see “Using the DECODER (EXT-2) function” on page 29.

„Connecting headphones

„Connecting Speakers/Amplifier

See the Audio equipment connection diagram, then connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

Read the manuals provided with the amplifier and speakers.

Turn the TV and amplifier off.

To prevent magnetism from the speakers adversely effecting the TV screen, use magnetic-shielded speakers for the front speakers.

Note that connecting cables are not supplied.

Right side

 

 

of the TV

L

R

AUDIO OUT

 

 

L R

 

 

1Amplifier

2External speakers (Magnetic-shielded type)

ENGLISH

Connect the headphones with a stereo mini-jack (3.5 mm diameter) to the headphone jack at the TV front panel.

„Video/sound signal output from the EXT-2 terminal

You can change over the output of the video/sound signal from the EXT-2 terminal. It is useful when you want to dub the video/sound from another device on the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 19.

The output from the AUDIO OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

Adjust the volume of the external speakers with the amplifier.

„TV output from the EXT-1 terminal

The output of video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.

Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.

The video/sound signal from an EXT terminal cannot be output.

Teletext programmes cannot be output.

„Connecting a PC

For details, see “Looking at images from a computer” on page 26.

31

Page 33
Image 33
JVC AV42PD20ES manual „ T-V Link compatible VCR, „ Connecting headphones „ Connecting Speakers/Amplifier, „ Connecting a PC