JVC TDR6 installation and operation guide Correcting Mistakes

A space can be entered by either a single press of the “0” key. For example, to enter the words LA Default the following keys would be pressed:

■555 selects L

■2 selects A

■0 selects space

■3 selects D

■→ advances the cursor so the next letter can be selected

■33 selects E

■→ advances the cursor so the next letter can be selected

■333 selects F

■2 selects A

■88 selects U

■555 selects L

■8 selects T

■Enter to issue the command

Issuing Commands To issue a command from the front panel, perform the following steps:

1.Navigate to the required command or parameter using the Next and Selection buttons.

2.Select the parameter to be modified. The parameter and its option will begin to flash.

3.Change the parameter option as required:

❒If the available options appear in a list, scroll through the list using the Up, Down, or Select buttons.

❒If the option requires a numeric value to be entered, enter the value using either the Up and Down buttons to increment the value or using the numeric keypad to type in the value.

4.Issue the command by pressing the Enter key. An asterisk will briefly display and then disappear when the system is finished processing the request. The parameter, with its updated value, is then displayed and does not flash.

❒

❒

If the Enter button is not pressed, the parameter is not changed.

While the TDR6 is reconfiguring the parameter to the new value, the front panel is temporarily disabled.

	The TDR6 configuration files are stored in non-volatile memory. When the TDR6
	configuration is changed using the front panel, the changes are automatically
NOTE	stored in non-volatile memory. The TDR6 automatically restores to the saved
	configuration whenever the unit is reset or powered up.
Correcting Mistakes	Selecting Options from a List If you are selecting a parameter from a list, and
	have not pressed the Enter button, use the Up or Down buttons to scroll to the
	correct option.
	Using the Keypad If you are entering a value with the keypad, and you have
	not pressed the Enter button, you can either:
	■ Press the Up button to change the value to 0, then enter the correct value
	■ Press the Down button to delete the numbers (from right to left), then enter the
	correct value

Front Panel 01-0870-401B 01/03 19