The Default Configuration menu displays. The configuration option that appears on the LCD, in this example Default1, is the current TDR6 configuration.

Default Config. Menu

Config =

Default1 ----

>

If the LCD initially displays Config = DVB, the TDR6 was initialized to the default DVB-compliant configuration. However, some or all of the parameters may have been manually changed since the unit was initialized. To ensure that all of the TDR6 parameters are set to the default DVB configuration, continue with the next step.

3. Scroll to and select the DVB parameter. The option begins to flash.

Default Configuration Menu

Config =

DVB ---->

4.Press the Enter button. The TDR6 reconfigures the system to the DVB defaults.

Initializing . . .

5.When the DVT Receiver/Decoder main menu displays, the TDR6 is set to the default DVB configuration.

To initialize the TDR6 to the DVB-compliant configuration using a remote unit:

1.Issue the command MC DEFAULT RESTORE DVB.

2.Ensure that the baud rate setting for your remote device communications package is set to 38400 bps.

If the remote unit is set to communicate with the TDR6 at a baud rate other than 38400 bps, the remote unit will not be able to communicate with the TDR6 after the defaults have been set. To resolve this issue, the equivalent parameter in the software settings of the remote unit must be

NOTE changed to 38400 bps.

However, the remote unit software settings must not be changed before issuing the MC Default Restore command to the TDR6, as the remote unit will not be able to communicate with the TDR6.

Selecting a Service

The TDR6 automatically selects the first service in the transport stream. You may need to select another service. To select a service using the front panel:

1.From the Details menu select Service>Number. The LCD displays the current service.

2.Select the service, which begins to flash.

3.Scroll through the list of services until the required service is displayed.

4.Press the Enter button.

To select a service using the remote unit issue the command DC PROG #, where

#is the number of the required service.

48

01-0870-401B 01/03

Configuring the TDR6

Page 58
Image 58
JVC TDR6 installation and operation guide Selecting a Service