JVC TDR6 Default Configurations, Demodulator a D, Standard-Definition Video Decoder

Default Configurations

B

This appendix provides the settings for the TDR6 default factory configurations.

All parameter settings are the same for all factory defaults, except where noted.

The TDR6 is set to the DVB-compliant defaults at the factory.

	Defaults
Parameter	Settings for DVB, Default1, Default2, and Default3	Exceptions
	Configurations
Input	ASI	Default3 = RF_A
Demodulator A - D
RF Frequency	11210 MHz
LO Frequency	10000 MHz
Data Rate	8448000 bps
Code Rate	5/6
LNB Power	Off
Modulation	QPSK
Rolloff	25RCRO
Tuner Freq	1210
Sym Rate	5500187
Standard-Definition Video Decoder
Video PID	Defaults to the first video channel detected in the selected
	service.
Auto Select	On
Video Mode	PAL
	If the selected service is NTSC, the auto-detect function of the
	video decoder senses the mode and automatically switches to
	the NTSC mode.
PAL Submode	I (in PAL mode only)
Setup 7.5 IRE	Auto (in NTSC mode only)
Video Delay	0
Vertical Offset	0
Horizontal Offset	0
Tiernan Closed	Off
Captions
High-Definition Video Decoder
Video PID	Defaults to the first video channel detected in the selected
	service.
Video Format	720p
Video Frame Rate	59.94

Default Configurations 01-0870-401B 01/03 61