TDR6 Remote Command Listing

Mnemonics

Parameters/

DVB Defaults

Description

Response Values

 

 

 

 

 

 

 

 

 

ADx

 

where x = A, B, C, D, E,

The TDR6 can be configured with up to six separate audio

 

 

or F

 

channels based on the installed option cards. The ports are

 

 

 

 

identified based on the following:

 

 

 

 

If only a TDEC-6100 option module is installed, audio

 

 

 

 

ports A and B can be configured.

 

 

 

 

If only a TAUD-6100 option module is installed, audio

 

 

 

 

ports A to D can be configured.

 

 

 

 

If both option modules are installed, audio ports A, B, C,

 

 

 

 

and D correspond to the audio ports located on the

 

 

 

 

TAUD-6100 board, while audio ports E and F correspond

 

 

 

 

to the audio ports located on the TDEC-6100 option

 

 

 

 

module.

 

 

 

 

For the remote command ADx, x = A, B, C, D, E, or F, and

 

 

 

 

designates the audio output that is the object of the

 

 

 

 

command, as described above.

 

 

 

 

Commands for all audio channels are the same.

 

 

 

 

When ADx is entered, the TDR6 returns the following audio

 

 

 

 

information for the designated channel: auto select, PID,

 

 

 

 

source, channel mode, volume, preferred language, sync,

 

 

 

 

delay, and rate.

 

 

 

 

Front panel equivalent: None

 

 

 

 

 

ADx

AUTO

On, Off

On

Sets how PIDs are selected for the specified audio output:

 

 

 

 

On: TDR6 selects the lowest incoming PID

 

 

 

 

Off: Operator must enter the PID manually

 

 

 

 

Front panel equivalent: Details>Audio>Slot_x>Audio x>Auto

 

 

 

 

Select

 

 

 

 

 

ADx

CHANNELMODE

Left, Right, Stereo

Stereo

Sets the mode for the specified audio output:

 

 

 

 

Left: Selects the audio stream from the left channel and

 

 

 

 

supplies that stream to both the audio left and audio right

 

 

 

 

outputs

 

 

 

 

Right: Selects the audio stream from the right channel

 

 

 

 

and supplies that stream to both the audio right and audio

 

 

 

 

left outputs

 

 

 

 

Stereo: Supplies both mono streams to the audio left and

 

 

 

 

right outputs exactly as sent by the encoder

 

 

 

 

Front panel equivalent:

 

 

 

 

Details>Audio>Slot_x>Audio x>Channel Mode

 

 

 

 

 

ADx

DELAY

-1000 to +1000

0

Sets the compressed audio bit stream buffer delay, which

 

 

milliseconds

 

controls the amount of time delay between the audio and

 

 

 

 

video.

 

 

 

 

Delay is primarily provided for interoperability with other

 

 

 

 

manufacturers’ equipment. It is not normally necessary to

 

 

 

 

use a non-zero delay value.

 

 

 

 

Front panel equivalent:

 

 

 

 

Details>Audio>Slot_x>Audio x>Delay

 

 

 

 

 

ADx

LANG

English, Russian,

English

Selects the language for the specified audio output from the

 

 

Spanish, French,

 

languages available in the selected service.

 

 

German, Dutch, Italian,

 

Front panel equivalent:

 

 

Portuguese, Korean,

 

Details>Audio>Slot_x>Audio x>Preferred

 

 

Japanese, Chinese,

 

 

 

 

Arabic, Malayalam

 

 

 

 

 

 

 

ADx

PID

<available PIDs> or OFF

ADA—36

Selects a specific PID from those currently available.

 

 

 

ADB—37

When no audio is present, the system returns the message

 

 

 

ADC—38

no audio present.

 

 

 

ADD—39

To query all available audio PIDs, enter the command ADx

 

 

 

ADE—36

PID ?

 

 

 

Front panel equivalent: Details>Audio>Slot_x>Audio x>PID

 

 

 

ADF—37

 

 

 

 

 

 

 

 

 

ADx

RATE

0 to 640

Query-only; displays the audio data rate

 

 

 

 

Front panel equivalent: None

 

 

 

 

 

Using a Remote Unit

01-0870-401B 01/03

37

Page 47
Image 47
JVC TDR6 installation and operation guide Auto, Channelmode, Delay, Lang, Pid ?, Rate