JVC TDR6 Unlocking the Front Panel, Setting the Date, Setting the Time, Performing a System Reset

Unlocking the Front Panel

To unlock the front panel:

1.From the DTV Receiver/Decoder menu, select Control. The Control menu displays.

2.Select FP_Lock. The Front Panel Access menu displays showing the status of the front panel: Password = 0.

3.Using the front panel keypad, type in the password and press Enter. The default password is 7384.

4.The front panel displays State = Unlocked indicating that the front panel is now unlocked.

If the wrong password is entered, the TDR6 displays Password = 0. If this occurs, use the front panel keypad to type in the correct password and press Enter.

Setting the Date

To set the date:

1.From the DTV Receiver/Decoder menu, select Control. The Control menu displays.

2.Select Clock>Date.

3.Use the keypad to type in the correct date, separating each category with a decimal point. The date is entered in mm/dd/yyyy format.

4.Press the Enter button.

If the date is entered incorrectly, or an out-of-range value is entered, the TDR6 will display and continue to use the previously set date.

Setting the Time

The hours are in a 24-hour format and must be set from 00 to 23, where 00 is midnight and 23 is 11 PM. For example, for 8 AM you would set the hours to 08, and for 8 PM you would set the hours to 20. Both minutes and seconds can be set from 00 to 59. To set the time:

1.From the DTV Receiver/Decoder menu, select Control. The Control menu displays.

2.Select Clock>Time.

3.Use the keypad to type in the correct hour, minutes, and seconds, separating each category with a period.

4.Press Enter.

Performing a System Reset

To reset the TDR6:

1.From the DTV Receiver/Decoder menu, select Control. The Control menu displays.

2.Select Reset and press Enter. The TDR6 is reset to the last configuration set; all programmable logic and firmware is reloaded; the unit is restarted; and the fault history log is cleared

30 01-0870-401B 01/03 Front Panel