JVC VN-C655 Function/Set Value, Alarm 1/Alarm, Detect Mode, Alarm Output, Go to a preset

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C655U Setup Tool" (3. Alarm Setting) (Continued)

Alarm Input

	Item		Function/Set Value	Initial Value
1 Alarm 1/Alarm 2		This section describes setting procedures for alarm input.		—
	Mode	For selecting whether to enable or disable the input signals.		Not Available
		Set Values : Available, Not Available
	Detect Mode	For selecting the method for detecting input signals.		Make
		Make : Detect input signals at the "Make" contact point.
		Break : Detect input signals during "Break".
		Toggle : Detect input signals at both "Make" and "Break".
	Alarm Output	For selecting whether to output from the alarm output terminal		Not Available
		when there is alarm input.
		Not Available : Do not output from the alarm output terminal.
		Alarm Output 1 : Send output from the Alarm Output 1 terminal.
		Alarm Output 2 : Send output from the Alarm Output 2 terminal.
		Note
		• Unless the alarm output in the "Alarm Output" tab is enabled,
		this function will not be activated even if alarm output is
		selected in the alarm input settings. (☞ Page 39)
	Go to a preset	For setting whether to move to the preset position when there		Not Available
	position	is alarm input.
		Not Available : Do not move to the preset position.
		Home	: Move to the home position.
		1 to 99	: Move to the preset position.
	Return Mode	For setting whether to return the camera that has moved to the		Not Available
		preset position upon the alarm input back to the home position.
		Use [Return Interval] to set the time interval before returning
		the camera to its home position.
		Not Available : Do not return to home position.
		Return	: Return to home position.
		Event	: Return to home position if operation is not in
			the manual mode.
	Interval	For setting the time interval before the camera returns to its		0
		home position when [Return Mode] is set to "Return".
		Set Value : 0 to 65535 sec
	Black & White	For switching from the Color to Black & White mode when there		Not Available
		is alarm input.
		Not Available	: Do not switch between Black & White/Color mode.
		Color	: Color mode at all times.
		Black & White : Black & White mode at all times.
		Auto	: Switch automatically between Black & White
			and Color mode according to the brightness
			of the object.

Note

•When Auto is selected, switching may fail in some cases due to the lighting conditions or angle of view. In order to ensure that switching is properly performed, it is recommended that signals from an external sensor (sold separately) be input to the alarm terminal of this camera.

36