JVC VN-C655 manual Setting the Trigger Recording screen, Setting the Frame Rate screen, Example

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C655U Setup Tool" (4. Recording Setting)

This function records the image to the memory of VN-C655 when an alarm is activated.

●When an alarm is activated, image recording can be carried out in one of the following two ways.

One way, local recording, saves images to the VN-C655 memory, and the other record images with [V.Networks Controller] and saves them to the PC hard disc drive, etc. ( ☞ Page 67)

1.Start up the "VN-C655U Setup Tool" and select [Recording]. To make new values effective, click on [Apply], followed by [OK].

●Setting the [Trigger Recording] screen

1 Select alarm input signal ÒTriggerÓ for starting local

recording.

2To set the frame rate for local recording, select "Change the Recording Frame Rate during trigger recording", followed by selecting the frame rate accordingly.

Default frame rate is set at 10 fps. A frame rate of 10 fps for recording will be used when this box is not checked. (Set values: 30, 15, 10, 8, 6, 5, 4, 3, 2, 1)

● Setting the [Frame Rate] screen	3 For setting the recording time.
		This can be set up to 30 seconds before and 60
		seconds after the alarm input.
		Cautions
		● [Before trigger] and [After trigger] values cannot
		be set to "0" at the same time.
		● Due to the memory capacity of VN-C655, recording
		time set for [Before trigger] and [After trigger] may
		differ from the actual maximum recording time.
		(Example)
		If 320x240 (15 fps)/640x480 (5 fps) with a
		compression rate of 2, the actual recording time
		is 5 to 0 and 30 to 35 seconds, before and after a
		trigger respectively.

4 For setting the priority.

Frame Rate : Priority is given to frame rate settings.

Recording Time : Frame rate is automatically adjusted such that recording can be performed according to the specified recording time.

40