Alarm Output
| Item |
| Function/Set Value | Initial Value |
8 Output 1/ | This section describes the setting procedures for alarm output. | OFF | ||
| Output 2 | Set Values | : ON, OFF |
|
| Output Value | Select the alarm output method. | — | |
|
| Output OFF : Output alarm signals when the Alarm Output 1 |
| |
|
|
| or Alarm Output 2 terminal is connected to the |
|
|
|
| GND terminal. |
|
|
| Output ON : Output alarm signals when the Alarm Output 1 |
| |
|
|
| or Alarm Output 2 terminal and the GND terminal |
|
|
|
| are disconnected from each other. |
|
| Pattern | Level | : Continue output of alarm signals throughout the | — |
|
|
| alarm input process. |
|
|
| Momentum : Output alarm signals only at the specified time. |
| |
|
|
| Specify time using the Return Interval item. |
|
|
|
|
| |
| Interval | For setting the output interval when the Output Pattern item is | — | |
|
| set to Momentum. |
| |
|
| This is disabled when the Output Pattern item is set to Level. |
| |
|
|
|
| |
9 Output 1 | Upon pressing the Output button, alarm signal output will be | — | ||
| force output/ | sent from the alarm output terminal on the ceiling mount. |
| |
| Output 2 | This is used for checking the alarm operation. |
| |
| force output | Notes |
|
|
|
|
|
| |
•Output is disabled when the Output Pattern item is set to "Level".
39
