1-3 Installing the Camera
Attach Drop Prevention Wire to this hook.
Drop Prevention Wire
1.Attach the safety wire to prevent the camera from falling down
As shown in the diagram, pull out the safety wire from the camera and hang it to the safety wire fastening hook on the ceiling mount.
Be sure to connect the safety wire to prevent the camera from falling down.
Cautions
¥Do not connect cameras other than VN- C655 to the ceiling mount. Doing so may cause the camera to malfunction.
¥Be sure to connect the safety wire. Otherwise, the camera may fall to the ground.
Ceiling Mount
Locking Screw
Camera
Camera Clamping
Bracket
2.Check that the locking screw is loosened The camera cannot be properly installed if the locking screw of the ceiling mount is not loosened.
3.Fit the camera to the ceiling mount Check the position of the camera clamping bracket and that of the locking screw, and fit the camera to the Ceiling Mount.
21
