Alarm In
For specifying the camera operation upon input of alarm signals.
1IN1/IN2
On : Detect Mode
(Set value: Make, Break, Toggle)
: Alarm Out
(Set value: Not Available, OUT1, OUT2)
:Go to a Preset Position
(Set value: Not Available, Home, Position 1 to Position 99)
:Return Mode
(Set value: Not Available, Return, Event)
: Return Interval
(Set value: 1 to 65535 seconds)
: Black & White
(Set value: Not Available, Color, Black
&White, Auto)
:Message Packet
(Set value: Available, Not Available)
:FTP
(Set value: Available, Not Available)
Off : Do not use Alarm 1 and Alarm 2.
2Relay Alarm On : Alarm Out
(Set value: Not Available, OUT1, OUT2)
:Go to a Preset Position
(Set value: Not Available, Home, Position 1 to Position 99)
:Return Mode
(Set value: Not Available, Return, Event)
:Return Interval
(Set value: 1 to 65535 seconds)
:Black & White
(Set value: Not Available, Color, Black
&White, Auto)
:Message Packet
(Set value: Available, Not Available)
:FTP
(Set value: Available, Not Available)
Off : Do not use Relay Alarm.
Other Triggers
For setting alarm activation via methods other than alarm input.
3Preset Position On : Alarm Output
(Set value: Not Available, OUT1, OUT2)
:Black & White
(Set value: Not Available, Color, Black & White, Auto)
:Massage Packet
(Set value: Available, Not Available)
Off : Do not use "Preset Position" Alarm.
4Black & White On : Alarm Out
(Set value: Not Available, OUT1, OUT2)
:Go to a Preset Position
(Set value: Not Available, Home, Position 1 to Position 99)
:Return Mode
(Set value:Not Available, Return, Event)
:Return Interval
(Set value: 1 to 65535 seconds)
:Massage Packet
(Set value: Available, Not Available)
Off : Do not use Black & White Alarm.
Alarm Out
For performing setting related to output during an alarm activation.
5OUT1/OUT2
On : Output Value
(Set value: ON, OFF)
:Pattern
(Set value: Level, Momentum)
:Momentum Interval
(Set value: 1 to 5000 milliseconds)
Off : Do not output alarm.
Notes
●Set output settings according to settings of the device for which alarm output is sent to.
●When alarm setting is complete, always check to ensure that the alarm is functioning correctly.
101
