JVC VN-C655 manual Setting values -5 to, Sharpness

Item					Function/Set Value						Initial Value
ExDR Level	To make a low-light section of the object easy to view: Increase										0
(Continued)	the level.
	To make a highlighted section of the object easy to view: De-
	crease the level.
	Setting values : -5 to 5
	• When the difference in brightness between objects is large,
		the picture may not change even when the ExDR LEVEL is
		varied. This is due to the characteristics of the camera and is
		not a malfunction.
	• When the item "SHUTTER" is set to 1/250 or higher,the set-
		tings to the item "ExDR LEVEL" cannot be carried out.
	• When the item "ExDR MODE" is set to OFF, the settings for
		the item "ExDR LEVEL" cannot be carried out.
V.Sharpness	This function sets sharpness in the vertical direction of the										NORMAL
	image.
	NORMAL		: Normal sharpness.
	HIGH		: High sharpness.
	The following phenomena may be observed when HIGH is
	selected. This is not a malfunction.
	*Horizontal stripes are observed on bright objects.
	*Vague horizontal stripes are observed under low light condi-
		tions.
BLC	Sets of area of back light compensation. Use this function when										OFF
	the object appears dark (under auto iris control) because of
	the presence of a bright light source behind it. This function
	make it possible to place the unnecessary light source outside
	the photometry area.
	OFF					: The backlight compensation function
						does not work.
	ARER 1 to AREA 4 : Select one of the four types.
		Photometry Area					Photometry Area
		Photometry							Photometry	Photometry
										Area
		Area
									Area
		OFF		Area 1				Area 2	Area 3	Area 4
	When the item "ExDR MODE" is set to ON, the item "BLC" is
	set to OFF. Under this condition, the settings to the item "BLC"
	cannot be varied.

63