JVC VN-C655 manual One Push AF, Auto Level, Light

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C655U Setup Tool" (10. Black & White Setting)(Continued)

1Mode

For setting the function on switching from Color to Black & White mode.

Black & White : Black & White mode at all

	times. :
	Black & White mode at all
Color	times.
	: Do not switch to the Black
	& White mode.
Auto	: Switches automatically to
	the Color	mode	when
	brightness	level	of the
	object is high, and to the
	Black & White mode when
	brightness	level	of the
	object is low.

3One Push AF

For setting whether to adjust focus automatically when switching between the Color / Black & White modes.

ON : Turn on auto focus function.

OFF : Turn off auto focus function.

Note

When in the Black & White mode, this camera is sensitive to both visible and near-IR light. As such, images may become out of focus upon switching from the Color to Black & White mode, depending on the type of light source used. When this occurs, adjust the focus again in the Black & White mode.

Note

To ensure switching between the Black & White / Color modes Switching between Black & White / Color may be performed according to the brightness of the object when the mode is set to Auto. However, this may sometimes fail due to the lighting condition or angle of view.

In order to ensure proper switching, it is recommended that switching be performed by inputting signals from an external sensor (sold separately) to the alarm terminal of this camera.

2Auto Level

For setting the signal level of the object that will be switched to the Black & White mode when the [Mode] item is set to "Auto".

Setting is disabled if [Mode] is set to any value other than "Auto".

Low : Switch to the Black & White mode when signal level of the object is low.

Normal: Switch to the Black & White mode when signal level of the object is normal.

High : Switch to the Black & White mode when signal level of the object is high.

4Light

Set according to the type of lighting used for the object when in the Black & White mode. Normal : Set to this when a normal light is

used.

IR : Set to this when using an infrared emission light.

Note

Switching from the Color to Black & White mode may not function correctly if the "IR" setting is used under ordinary sunlight or fluorescent light.

50