Diagnostics - Debug tab The Debug tab allows you to store the communications between the scanner and a scanning application, as well as the images, to a file that can be reviewed later by Kodak support personnel.
Logging — saves the communications between the scanner and a scanning application. The options are: Off (the default), On or Custom. It is suggested that you do not use the Custom setting, unless directed to do so by Kodak support personnel.
NOTES:
•Flag and Filter are only available for Custom; only make changes as directed by Kodak support personnel.
•For changes to take effect, you must restart your application.
Images
•Received From Scanner: normally, it is not necessary to save the images received at the PC from the scanner. It is suggested that you only turn this on when instructed by Kodak support personnel.
-Save: normally, it is not necessary to save the images received at the PC from the scanner. It is suggested that you only turn this on when instructed by Kodak support personnel.
-File prefix: the scanner will apply the entered text to the beginning of each file created. This can be used to more easily find and sort the saved images.
-Held in memory: if scanning a large job and you only need to save the last few images, then turn this on by selecting the number of images you want to save.
NOTE: Turning this on will use more PC memory.
95 |
