Border — allows you to select what action to perform on the edges of your electronic image.
•(none)
•Add: includes up to approximately 0.1 inches of border around all of the image edges.
NOTE: This option is only available for the following selections: when both Document: Automatically Detect and Straighten and Image: Part of Document are selected; Document:
Automatically Detect; or Document: Manually Select.
•Remove: produces an image that contains just the document by eliminating any residual border. Residual border can be caused by variations in a document edge; for example, when a document is not a perfect rectangle and/or was fed crooked.
NOTES:
•While this option will not remove large amounts of residual border, there is a possibility that a small amount of the document will be lost.
•This option is only available when both Document: Automatically Detect and Straighten and Image: Entire Document are selected.
49 |
