Scanner tab | The Scanner tab provides the following options. |
Paper Source
NOTE: Flatbed options are only available if your scanner is equipped with the Kodak i1400 Series A3 Flatbed Accessory.
•ADF: if you are scanning documents from the input tray.
•Flatbed: if you are scanning documents using the flatbed.
Transport timeout — allows you to set the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken. You can specify a time delay setting from 1 to 300 seconds.
Energy Star — allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state. Choices are: 0 to 60 minutes.
Blank image detection — select the image size (KB), below which an image is determined to be blank. Images with sizes less than the number you select will not be created. If you use this option, you must specify a blank image size for each image type (Binary, Gray and Color) you want to delete. If you do not make an entry in these fields, all images are kept.
105 |
