Selecting Image settings
The procedures that follow describe how to configure a customized Setting Shortcut. Complete descriptions of the features and options on the Kodak Scanner window and tabs are found in the section entitled, “The main Kodak Scanner window”.
NOTE: Setting Shortcuts can sometimes be overridden by your scanning application. If this happens, the shortcut you call will appear in the main Kodak Scanner window in italics with the word <Changed> next to it. This is normal behavior for an application that does not use Setting Shortcuts and downloads its preferred individual settings to the scanner first and then provides access to the TWAIN datasource.
When you click OK to begin scanning, you will be asked if you want to save the changed settings. When using an application that does not use Setting Shortcuts, select No to this prompt and continue scanning.
From the main Kodak Scanner window:
1.Select a predefined Setting Shortcut from the Setting Shortcuts list. Choose a Setting Shortcut that describes as closely as possible the image output you desire.
2.Determine if you want to capture an electronic image of the front of your document, back of your document or both sides of your document and make the selection from the Input document is drop- down list. Options are:
•Two Sided — captures both sides of the document
•One
•One
37 |
