Device - General tab

The General tab allows you to set scanner-specific options and

 

provides access to scanner diagnostics.

Paper Source

NOTE: Flatbed options are only available if your scanner is equipped with the Kodak i1400 Series A3 Flatbed Accessory.

Automatic: looks for paper in the document feeder first. If there are no documents in the input tray, the scanner will scan from the flatbed.

Document Feeder: scanner will only scan documents from the input tray.

Flatbed: scanner will scan from the flatbed.

Power Saver — allows you to set the amount of time the scanner has to be inactive before going into power saver mode. You can turn this option off or set a time from 5 to 240 minutes.

Document Feeder

Timeout: allows you to select the amount of time the scanner will wait once the last document enters the feeder before the timeout occurs. You can set a time from 1 to 300 seconds.

Action when timeout occurs: indicates the action that will be taken when the document feeder timeout has been reached.

-Stop Scanning: scanning will stop and control will return to the scanning application (i.e. ends the job).

84

A-61550 May 2007

Page 89
Image 89
Kodak I1400 manual Device General tab, Paper Source, Document Feeder