Connecting the power cord to the scanner
Disconnecting the power cord
Use only the power supply that was provided with the Kodak i1400 Series Scanner. Do not substitute another power supply model or another manufacturer’s power supply.
When the drivers have been installed, connect the power supply and power cord to the scanner. Make sure that the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible.
1.Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner.
2.Attach the power cord for your power type to the power supply.
3.Plug the output power cord from the power supply into the power port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
To disconnect the power cord from the scanner:
•Place your thumb on the arrow on the collar of the power connector and pull it away from the scanner.
9 |
