Using the ISIS Driver

The main ISIS Driver window

The ISIS Driver is software that communicates with the scanner. This driver is created and maintained by EMC Captiva and is provided with the scanner by Kodak. Many scanning applications support ISIS drivers and this driver can be used to interface with them.

This section provides descriptions of the options on the tabs of the main ISIS Driver window and how to set these options.

For the purpose of this manual, all displayed windows assume the features available on the Kodak i1420/i1440 Scanners. If you have a Kodak i1410 Scanner, all options are limited to one-sided scanning only.

See the section entitled, “Starting the Scan Validation Tool” earlier in this chapter to access the main ISIS Driver window.

The main ISIS Driver window provides a set of 9 tabs. You can select each of these tabs and make any choices necessary to meet your scanning needs. The buttons on the bottom of the window apply to all the tabs.

Default when you select Default, the values will be reset to the factory defaults.

Copy this function is only available when scanning two-sided documents. The Copy button provides a convenient way to set up the color, grayscale or black and white image settings on one side and transfer them to the other. For example, if you highlight and set up Front Image #1, you can use the Copy button to duplicate those settings for Back Image #2.

OK saves the values set on all tabs.

Cancel closes the window without saving any changes.

98

A-61550 May 2007

Page 103
Image 103
Kodak I1400 manual Using the Isis Driver Main Isis Driver window