Creating a custom dropout color to drop a single color
In this example, let’s assume you want to configure a custom dropout color that will drop a single color from a document.
1.Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output.
NOTE: The shortcut will need to include a Black and White
2.Select Settings to display the Image Settings window.
3.Select the Black and White
4.Select Configure within the Color dropout option on the Enhancements tab.
5.Select the Single tab.
6.Select the Color's Add icon to display the Add window.
7.Enter the name of the custom color.
8.Place a representative document in the input tray of the scanner.
9.Select Preview to perform a preview scan and add the color.
10.Select a predefined outline from the Outline's Add icon.
11.Adjust the outline by placing it over an area of the document that contains the color to be dropped (i.e. area of the document to learn).
NOTE: Some documents contain different shades of the same color. For those documents, it is recommended that you start by placing the outline over an area that contains the darkest shade.
12. Select Display Dropped Image to see the effect of the learning.
If all of the color is not dropped, repeat the following steps until all the color is dropped:
•select Display Color Image
•add another outline and place it over an area that was not dropped
•select Display Dropped Image to see the effect of the updated learning
13.Select Save to save the learned information.
81 |
