4.Pull gently on the end of the imaging guide and slowly remove it from the scanner.
5.Discard the used imaging guide.
6.Remove any dust or debris from the guide track. Do not allow debris to fall into the scanner.
7.Wipe both sides of the new upper imaging guide with a fresh Staticide Wipe.
8.Dry both sides of the new upper imaging guide with a dry Staticide Wipe.
9.Align the new upper imaging guide in the guide track and slowly push it in.
10.Realign the upper imaging guide bracket and tighten the screw.
11. Reinstall the side door.
141 |
